New IR Motion Detector for Corridors

EE880, the new infra-red motion detector, is specifically suited for long corridor application, with a detection zone of up to 20m x 4m. Built with an IP54 enclosure and a 10A output relay, EE880 enables automatic switch on / off the corridor lighting, be it indoor or outdoor, for better energy conservation and comfort.

Introduction

The EE880 motion detector is sensitive to infrared radiation emitted as heat from a moving body. The detector switches on the load connected to it when a heat-emitting body moves within its detection area.

The load remains lit for the period of time to which the detector has been set and until it no longer detects movement in its surveillance area.

EE880 has been specially designed to meet the needs of long corridors.

Detection

Settings

Wirings

Parallel connections of detectors, wiring for lamp connection with or without neutral conductor, connection with external override switches are possible. Please refer to user instruction.

Technical Specifications

CharacteristicsHager EE880
Technology
Passive Infrared
Voltage
230AC (+10% - 15%)
Frequency
50 Hz / 60 Hz
Standards
EN 60669-2-1
Front Side Protection
IP 54
Back Side Protection
IP 54
Protection Class
Class 2
Detection Area
20m x 4m
Time Adjustment
5 sec...15 min
Twilight Adjustment
2...2000 LUX
Temperature Range Operating
-20...50C
Temperature Range Storage
-35 ...+70C
Standby Power Consumption
1W
Incandescent Loads
2300W
Halogen Lamps
2300W
Halogen lamps VLV with ferromagnetic or electronic transformer
1500VA
Fluorescent tubes with ferromagnetic or electronic ballast
580W
Compact Fluorescent Lamp (CFL) / LED
20 x 20W
Not yet subscribed ?
Subscribe here !